SUPERTANK
  • SUPERTANK

240 VOLT HYDRAULIC GATE OPENER

A$3,563.00
Tax included
SUPERTANK - 240 Volt hydraulic swing gate drive unit for industrial gates up to 9 metres wide.
Quantity

Manufactured by SEA in Italy the Super Tank is a 240 volt swing gate hydraulic operator. The use of hydraulics in swing gate motors has been around for many years with the motor, tank and pump all contained within the housing. As with all things hydraulic gate operators come in various levels of quality but given that hydraulics are essentially designed for demanding sites our attitude is that they need to be the best and no corners should be cut. To this end SEA is recognised as being in the top two manufacturers in the world of hydraulic gate motors and maintains high levels of quality by producing all vital components in house. Low side room is a feature of this operator needing as little as 100mm. The SUPERTANK is suitable for gates to 9 metres wide and likes nothing better than a high duty cycle.

It is possible to use a variety of control boards to control the SUPERTANK including the ATA CB6, DG240 and the T2. The suggested board is the LOGICSEADG240 which has thrust control to regulate the SUPERTANK force and can be used as a one or two motor controller.

SUPERTANK

Data sheet

Height
90mm
Width
1270mm
Depth
90mm
Weight
12kg
Input Voltage
240 volts AC
Motor Voltage
240 volts AC
Opener Speed
20 seconds to 90 degrees
Duty Cycle
70 operations per hour
Maximum Gate Size
7.0 metres
Torque
640Nm
Current Draw
2.0A
IP Rating
IP55

Specific References

Download

sea-gate2dg-manual

sea-gate2dg-manual_en

Download (1.02M)

supertank manual

Download (2.26M)

You might also like